Pre Defined Mode: default mode where the most frequently accessed graphic infos are displayed with one mouse click:

• Bearing Pattern + T.E. — TCA (see figure beside)
• Bearing Pattern + T.E. — LTCA
• Tooth and Blank Geometry
• Stock Distribution (between Roughing and Finishing) and optimization
• Tooth Loads
• Corrective Machine Settings (Closed Loop) and Reverse Engineering
• CMM Nominal definition
• Cutting machines — with animations and 5Axis CnC interface

• Tooth, Complete Model, Cutting Machine, Blank,
• Diameter over Pins/Balls, and Caliper Measurement (for spur and helical gears),
• Path of Contact (animated),
• Transmission Error curve plus all other TCA and LTCA results,
• TCA and LTCA Bearing Patterns,
• Bearing Pattern Development, where the Pinion and Gear machine settings can be modified; thus a pinion may be developed for a specific gear, and vice-versa;
• Measured Surfaces, Corrective Machine Settings / Reverse Engineering
• CMM grid definition and output, for Zeiss-Ram, Hoeffler, Klingelnberg-P, CDS, MdM, CAGE and Zeiss GPro (a specific CMM can be added at user request),
• FEA model Meshing, and output in Patran Neutral file format,
• Finite Strips Analysis (bending stresses and deformations)